KX-NT321
To end programming
After assigning
the IP addresses
Select "QoS". Press SP-PHONE. Select "VLAN". Press SP-PHONE.
Press STORE.
Press HOLD three
times to return to the
Menu screen.
Select "VLAN (Enable)".
Press SP-PHONE.
VLAN ID
VLAN Priority
*1
To set the VLAN ID for the primary port
0–7
1–4094
Select "Priority".
Select "VLAN (Primary)". Press SP-PHONE. Press SP-PHONE.
Select "VLAN ID".
Press SP-PHONE.
To set the VLAN ID for the secondary port
VLAN ID
VLAN Priority
*1
1–4094
0–7
Select "VLAN (Secondary)".
Press SP-PHONE. Select "VLAN ID".
Select "Priority".
Press SP-PHONE.
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
*1
The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
the priority.
Document Version 2010-08 IP Networking Guide 77
4.5.2 Setting the VLAN Parameters
To Next Page
Loading...
