Panasonic KX-NCP500 - Page 81

KX-NT265 (software version 2.00 or later only)
To set the DS field value
To start programming
Press PROGRAM while
"Searching" is displayed.
Press VOLUME to
select "QoS".
Press SP-PHONE. Press VOLUME to
select "Diffserv".
Press SP-PHONE.
To end programming
Press STORE.
Press HOLD to return
to the Menu screen.
HOLD
Press VOLUME to
select "DS (Enable)".
Press SP-PHONE.
Diffserv
0.0–7.7
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
Document Version 2010-08 IP Networking Guide 81
4.5.3 Setting the Diffserv Parameters