EasyManua.ls Logo

Panasonic KX-NCP500 - Page 96

Panasonic KX-NCP500
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameter Descriptions
Unit Status
Parameter Description
Phone Number Specifies the extension number of the KX-HGT100.
Unit Information Specifies the status of the KX-HGT100 as follows:
• Update Profile: Basic Setting is not programmed (e.g., factory default).
• Registering: Registering the KX-HGT100 to the PBX.
• Normal: The KX-HGT100 is registered.
• Malfunctioning: The KX-HGT100 is in an error state.
• LAN cable unplugged: The LAN port of the KX-HGT100 is not receiving
any network signal.
• IP Address expired: IP address lease time from the DHCP server has
expired.
• IP Address conflict: The IP address of the KX-HGT100 conflicts with other
network devices.
Model Specifies the model number of the KX-HGT100.
Operating Bank Specifies the number of the memory bank for the current firmware.
*1
IPL Version Specifies the IPL (Initial Program Loader) version.
Firmware Version Specifies the current firmware version of the KX-HGT100.
*1
There are two memory banks. The Operating Bank number will cycle between these two memory banks, changing each time the
firmware is upgraded.
96 IP Networking Guide Document Version 2010-08
4.6.1 Registering IP Telephones

Table of Contents

Other manuals for Panasonic KX-NCP500

Related product manuals