Panasonic KX-NS1000 - Page 38

KX-NT321
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
To enter the IP address of the PBX
The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
Press HOLD twice to return
to the Menu screen.
Select "PBX IP
Address".
Press SP-PHONE.
Press SP-PHONE.
Press STORE.
Select "PBX".
Press SP-PHONE.
Press SP-PHONE.
Select "Primary
PBX".
Press SP-PHONE.
Select "Secondary
PBX".
Press SP-PHONE.
To enter the IP address of the Secondary PBX (If required)
PBX IP Address
PBX IP Address
Note
To
confirm the connection to the secondary PBX after assigning IP addressing information, (1) turn the
IP-PT’s power off, and (2) hold the STORE button and 2 key while turning the power on.
38 Getting Started
4.3.1 Assigning IP Addressing Information