Panasonic KX-NS300 - Page 46

To end programming
Press "STORE".
STORE
The IP-PT will reboot
and can then be
registered to the PBX.
To enter the IP address of the Secondary PBX (optional for KX-NT300 series
[Software version 2.00 or later only] and KX-NT500 series [Software version 1.00 or
later only])
PBX IP Address
Select "Secondary PBX".
ENTER ENTER
Continued from previous page
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
Note
The illustrations may differ from the buttons on your telephone.
46 Getting Started
4.3.1 Assigning IP Addressing Information