Panasonic KX-NS300 - 1.2.6 Alternating the Calling Method (Alternate Calling-Ring;Voice)

KX-NT265 (Software version 2.00 or later only)
Subnet Mask Address*
2
Default Gateway Address*
3
To set the IP address of the IP-PT
To set the subnet mask address
To set the default gateway address
To start programming
Supply power to the IP-PT.
Press PROGRAM
while "Searching" is displayed.
PROG.
Press VOLUME to
select "Subnet Mask".
VOL
Press SP-PHONE. Press SP-PHONE.
Press VOLUME to
select "Default GW".
VOL
Press SP-PHONE. Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
Press STORE.
Press HOLD
to return to the
Menu screen.
To enter the IP address of the PBX
Press HOLD
twice to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
VOL
Press SP-PHONE
twice.
Press
SP-PHONE.
PBX IP
Address
HOLD
IP Address*
1
Press VOLUME to
select "Network".
VOL
Press SP-PHONE. Press VOLUME to
select "DHCP (Disable)".
VOL
Press SP-PHONE
twice.
Press SP-PHONE.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
Getting Started 49
4.3.1 Assigning IP Addressing Information