Panasonic KX-NS500 - Page 28

Button Feature
Conference Used to establish a multiple party conversation.
Terminate
Used to disconnect the current call and make another call without hanging
up.
External Feature Access
(EFA)
Used to access special features offered by a host PBX or a telephone
company.
Call Charge Reference Used to check the total call charge for your own extension.
Call Park Used to park or retrieve a call in a preset parking zone.
Call Park (Automatic Park
Zone)
Used to park a call in an idle parking zone automatically.
For
KX-UT series SIP phones (except KX-UT113/KX-UT123) and S-PSs,
pressing this button selects an idle parking zone from among the Call Park
(preset parking zone) buttons configured on the phone. Set both the Call
Park (Automatic Park Zone) button and the Call Park (Preset Parking
Zone) button.
Call Log Used to show the incoming call information.
Call Log for ICD Group Used to have a Call Log button for incoming call distribution group.
Log-in/Log-out Used to switch between the log-in and log-out mode.
Log-in/Log-out of a specified
group
Used to have a Log-in/Log-out
button
for another incoming call distribution
group.
Log-in/Log-out for all groups Used to have a Log-in/Log-out button for all groups.
Hurry-up
Used to transfer the longest waiting call in the queue of an incoming call
distribution group to the overflow destination.
Wrap-up Used to switch the wrap-up status, Ready and Not Ready mode.
System Alarm Used to confirm a PBX error.
Time Service (Day/Night/
Lunch/Break)
Used to switch the time service mode.
Answer Used to answer an incoming call.
Release
Used to disconnect the line during or after a conversation or to complete
a Call Transfer.
Toll Restriction/Call Barring
Used to change the toll restriction/call barring level of other extension users
temporarily.
ISDN Service Used to access an ISDN service.
Calling Line Identification
Restriction (CLIR)
Used to switch between the CLIP and CLIR services.
Connected Line Identification
Restriction (COLR)
Used to switch between the COLP and COLR services.
ISDN-Hold Used to transfer a call using telephone company.
Headset Used to talk using the headset.
Time Service Switching Mode
(Automatic/Manual)
Used to switch the time service mode, Automatic or Manual.
28 User Manual
1.1.5 Before Operating the Telephones