Panasonic KX-NS500 - Page 346

Button Steps
Incoming Call Distribution
Group (ICD Group)
Select ICD Group from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
To
specify
the ring tone, select the ring tone type from Optional Parameter
(Ringing Tone Type Number).
Message Select Message Waiting from Type.
Message for Another
Extension
Select Message Waiting from Type.
Then enter the extension number or incoming call distribution group
extension number in Extension Number.
Call Forwarding (FWD)/Do
Not Disturb (DND)—Both
calls
Select FWD/DND (Both) from Type.
FWD/DND—Outside calls Select FWD/DND (External) from Type.
FWD/DND—Intercom calls Select FWD/DND (Internal) from Type.
Group FWD—Both calls
Select Group Fwd
(Both)
from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
Group FWD—Outside calls
Select Group Fwd
(External)
from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
Group FWD—Intercom
calls
Select Group Fwd
(Internal)
from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
Account Select Account from Type.
Conference Select Conference from Type.
Terminate Select Terminate from Type.
External Feature Access
(EFA)
Select EFA from Type.
Call Charge Reference Select Charge from Type.
Call Park
Select Call Park from Type.
Then select Specific from Parameter Selection.
Specify the number of the parking zone a call is to be parked in Optional
Parameter (Ringing Tone Type Number).
Call Park (Automatic Park
Zone)
Select Call Park from Type.
Then select Automatic from Parameter Selection.
Call Log Select Call Log from Type.
Call Log for ICD Group
Select Call Log from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
Log-in/Log-out
Select Log-in/Log
-out from
Type.
Then select None from Parameter Selection.
346 User Manual
3.2.1 User Programming