1-10 Installation
1.2 System Programming
Default All extension ports – Disable
• To change the current assignment from “Port 15” to “Port 15 & 16”, first it must be changed
to “Disable”. Likewise, to change it from “Port 15 & 16” to “Port 15”, first it must be
changed to “Disable”. If the current assignment is already “Disable”, making a change can
be done in 1 step.
• When “Port 15 & 16” is selected in this program, the following programs are automatically
set as described below.
[600] Extension Group Assignment:
extension port 15 — extension group 8
extension port 16 — extension group 8
[100] Hunting Group Set: extension group 8 — Enable
[101] Hunting Type: extension group 8 — Circular
[102] Voice Mail Port for KX-TVP100:
extension port 15 — Enable
extension port 16 — Enable
• If “Enable” is assigned in program [103] “DTMF Integration for KX-TVP100”, “Port 15” or
“Port 15 & 16” cannot be selected.
• The extension ports assigned as the Voice Mail APT ports in this program are automatically
set for Data Line Security.
• Related Feature Reference
1.1 System Features
Voice Mail Integration for KX-TVP50
☞
!
!
[131] Voice Mail 2 APT Port for KX-TVP50
Enables or disables APT voicemail operation on extension ports 15, or 15 and 16. When
enabled data is transmitted to the Panasonic Voice Processing System (KX-TVP50).
1 3 1
NEXT
SELECT
STORE END
(Port 15/
Port 15 & 16/
Disable)
*PSQX2118ZA-sec.1-UK 00.6.15 6:22 PM Page 10
To Next Page
Loading...
