• **: To hold the current call temporarily, press the HOLD button.To return to the held call,
press the line key whose indicator light flashes green slowly.
**: If you lift the handset to monitor a message recording, the caller will be able to hear
you. Even in this case, the message will still be recorded.
• The shaded areas are for the Hands-free operation.
Operations 2-7
Telephone Features 2.2
While a caller is leaving a message in your mailbox, you can monitor the message. If desired,
you can answer the call while monitoring. There are 2 methods available. In both modes,
when you are having a conversation, you will hear Call Waiting tone if Call Waiting has been
enabled.
Hands-free Mode: You can monitor messages automatically through the telephone speaker at
the same time.
Private Mode: You will hear an alert tone while the caller is leaving a message.
Preparation
• Assign the Live Call Screening (LCS) button
• Select the mode, either Hands-free or Private
• Set the Password
• Set the LCS feature
Flowchart of the Live Call Screening (LCS) Feature
Hang up*.
Press the RECALL or
the LCS Cancel button.
Press the LCS or the
SP-PHONE button.
Lift the handset.
(Call Waiting Tone)
To stop monitoring To stop monitoringTo answer the call
Press the RECALL or
the LCS Cancel button.
Hang up.
Press the SP-PHONE
/MONITOR
or LCS button.**
To stop the alert toneTo monitorTo monitor
To set LCS on
• Press the LCS button.
• Enter the password.
To cancel LCS
Press the LCS button.
Press the RECALL or
LCS Cancel button.
(No operation)
Hands-free Mode Private Mode
During a conversation
(Alert Tone)
Live Call Screening (LCS)
*PSQX2118ZA-sec.2-UK 00.6.15 6:22 PM Page 7