EasyManua.ls Logo

Panasonic KX-TA624 - Page 7

Panasonic KX-TA624
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation 1-5
System Features 1.1
A maximum of 2 VPSs can be connected to the system. When 2 VPSs are connected to the
system, keep in mind that each extension can have only 1 mailbox — but when the VPSs
have executed Auto Configuration, an extension has a mailbox in both VPSs. Therefore, you
must delete a mailbox in either VPS so that there are no duplicates. See the KX-TVP50
Installation Manual for further details.
!
!
Extension
group 8
System
15
16
Port 1
Port 2
KX-TVP50 (VPS2)
7
8
Port 1
Port 2
KX-TVP50 (VPS1)
Extension
group 7
A maximum of 4 extension ports (07, 08, 15 and 16) of the system can be connected to VPSs
with 4-conductor wire. Extension port 07, or ports 07 and 08 can be the Voice Mail APT
ports for VPS1 in program [130]. Extension port 15, or ports 15 and 16 can be for VPS2 in
program [131].
When “Port 7 & 8” is selected in program [130], extension ports 07 and 08 will be in
extension group 7 automatically. Likewise, when “Port 15 & 16” is selected in program
[131], extension ports 15 and 16 will be in extension group 8 automatically. Also the
Extension Hunting type is set as “Circular”, and the VM Hunting Chain and AA Hunting
Chain are enabled automatically in each of these 2 extension groups.
The lowest port (07 or 15) of each extension group must be connected to the Port 1 of a
VPS. The VPS data is transmitted to the VPS via the Port 1.
One connection between the system and a VPS, for example extension port 07 of the system
and Port 1 of the VPS, creates 1 Voice Mail extension and can only answer 1 call. Therefore,
if 1 VPS is connected to the system, maximum of 2 calls can be answered simultaneously.
A VPS can be assigned as the destination for the following features.
Call Forwarding – All Calls
Call Forwarding – Busy/No Answer
DISA Intercept Routing – No Answer
For these features, the caller does not need to know the mailbox number of the called
extension because the code is automatically transmitted to the VPS. If a DISA call is
transferred to the VPS by Intercept Routing from a DISA ring group, the system will
transmit the mailbox number of the lowest port number of the DISA ring group.
Data Line Security is set automatically on the Voice Mail extension.
*PSQX2118ZA-sec.1-UK 00.6.15 6:21 PM Page 5

Other manuals for Panasonic KX-TA624

Related product manuals