1.1 General Features
100 Feature Manual
• It is possible to specify which outside (CO) lines are connected to the PBX ( [400] CO Line
Connection). This prevents extension users from trying to select or making calls using outside (CO)
lines that are not connected.
Programming Manual References
[PT Programming]
[206] Dialing Start Time
[400] CO Line Connection
[404] CO Line Group Number
[405-407] Flexible Outward Dialing—Day/Night/Lunch
[419] Automatic Designated Line Access
[PC Programming]
9.1.7 Timers [1-6]—CO Dialing—Dialing Start Time
9.3.2 Incoming / Outgoing [3-2]—Outgoing Call—Day, Night, Lunch
9.3.3 Detail [3-3]—Connection, CO Line Group, Automatic Line Access
Feature Manual References
1.1.61 Flexible Buttons
1.1.70 LED Indication
1.1.76 Line Preference—Outgoing
Operating Manual References
1.3.52 Line Access, Outside (CO) Line—SUMMARY
3.1.3 Flexible Button Assignment—S-CO, G-CO, or O-CO button
1.1.72 Line Access, Automatic
Description
An extension user can select an idle outside (CO) line automatically from the assigned outside (CO) lines
( [419] Automatic Designated Line Access) by dialing the Automatic Line Access number.
Line Access Using the Other-CO (O-CO) Button
To select an idle outside (CO) line from among the outside (CO) lines that are not assigned to S-CO or G-
CO buttons, the proprietary telephone (PT) user can press the O-CO button.
Conditions
• If Idle Line Preference ( 1.1.76 Line Preference—Outgoing) is set on the extension through personal
programming, the user can access an idle line simply by going off-hook.
• The PBX waits for a preprogrammed length of time ( [206] Dialing Start Time) after seizing an outside
(CO) line before dialing.
• System programming determines the extension users that can make outside (CO) line calls in each
time service mode ( [405-407] Flexible Outward Dialing—Day/Night/Lunch).
To Next Page
Loading...
