1.1 General Features
88 Feature Manual
Conditions
• Extension button confirmation
A display PT user can confirm the button settings, such as the flexible CO button, by pressing the
corresponding button while on-hook.
• The Day, Night, Lunch, and Extension Lock buttons can only be assigned to flexible DSS buttons at an
extension assigned as the operator or manager.
Programming Manual References
[PC Programming]
9.2.4 Flexible Buttons [2-4]
Caller ID Selection—
Personal
Used to display and cycle through the information of an incoming call during a
conversation, while receiving a call, or while viewing caller information, display
the number of logged calls while on-hook, and inform an extension user that the
personal area call log is full (
1.1.18 Call Log, Incoming).
Caller ID Indication—
Common
Used to inform an extension user of calls logged in the common area, store the
information of an incoming call during a conversation, and view caller
information while on-hook and then call back a caller (
1.1.18 Call Log,
Incoming).
Caller ID Selection—
Common
Used to display and cycle through the information of an incoming call during a
conversation, while receiving a call, or while viewing caller information, display
the number of logged calls while on-hook, and inform an extension user that the
common area call log is full (
1.1.18 Call Log, Incoming).
Log-in/Log-out Used to switch between Log-in and Log-out status ( 1.1.80 Log-in/Log-out).
Day Used to change the time service mode to day mode ( 1.1.114 Time Service).
Night Used to change the time service mode to night mode ( 1.1.114 Time Service).
Lunch Used to change the time service mode to lunch mode ( 1.1.114 Time Service).
Extension Lock Used to remotely lock or unlock another extension ( 1.1.87 Operator/Manager
Features).
2-way Record Used to record a conversation into the user's own mailbox ( 1.1.120 Voice Mail
APT Integration).
2-way Transfer Used to record a conversation into the mailbox of a specified extension (
1.1.120 Voice Mail APT Integration).
Live Call Screening
(LCS)
Used to listen while a caller is leaving a message in the user's voice mailbox and,
if desired, intercept the call (
1.1.120 Voice Mail APT Integration).
LCS Cancel Used to stop monitoring the user's own voice mailbox while a caller is leaving a
message, or stop the alert tone heard in private mode while a caller is leaving a
message (
1.1.120 Voice Mail APT Integration).
Voice Mail (VM)
Transfer
Used to transfer a call to the mailbox of a specified extension ( 1.1.120 Voice
Mail APT Integration).
Button Function
To Next Page
Loading...
