1.1 General Features
Feature Manual 65
[500] DISA Incoming Call Dial Mode
[501] DISA Built-in AA
[600] Extension Group
[PC Programming]
9.2.11 Extension Group [2-6]—Group No.
9.3.1 Line Mode [3-1]—Mode of incoming CO calls—Day, Night, Lunch
9.3.2 Incoming / Outgoing [3-2]—Ringing for incoming CO calls—Day, Night, Lunch
9.6.1 Automated Attendant [6-1]—DISA Incoming Call Dial Mode, AA table
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
1.1.53 Extension Group
1.1.80 Log-in/Log-out
1.1.109 Ringing, Delayed
1.1.43 Display Information
Description
A display proprietary telephone (PT) can relay the following information to the user while making or receiving
calls:
Display Item Display Example Condition
The extension number and name of the
calling or called extension
123: Tom Smith Extension numbers and names
are programmable ( [009]
Extension Number, [604]
Extension Name). If an extension
name is not stored, only the
extension number will be
displayed.
The status of the called extension 123: Busy –
The name and number of the doorphone DoorPhone 1 –
The telephone number dialed 1234567890 –
The extension number and name of the
calling extension after the call is
forwarded
102:Mike –
The received call information The first line message can be
either (a) or (b) at each extension
through system programming (
[904] Caller ID Log Priority).
a) Caller's name ABC Company
b) Caller's number 12345678
c) Outside (CO) line number Call on CO 1
To Next Page
Loading...
