1.1 General Features
Feature Manual 51
Operating Manual References
1.3.32 Conference, Unattended
3.1.3 Flexible Button Assignment—Conference button
1.1.35 Confirmation Tone
Description
At the end of a feature operation, the PBX confirms the success of the operation by sending a confirmation
tone to the extension user.
Conditions
• It is possible to eliminate confirmation tone 3 (except for Call Hold Retrieve with the Feature Number)
through system programming ( [117] Call Pickup Tone, [105] Conference Tone, [106] External Pager
Access Tone).
Programming Manual References
[PT Programming]
[105] Conference Tone
[106] External Pager Access Tone
[117] Call Pickup Tone
[PC Programming]
9.1.11 Detail [1-10]—Extension—External Pager Access Tone, Extension—Call Pickup Tone, Conference—
Conference Tone
Feature Manual References
2.2.1 Tones/Ring Tones
Type Description
Tone 1 Sent when the setting is accepted, or sent when the Extension Lock feature is
set or canceled.
Tone 2 Sent when the new setting is identical to the previous one, or sent when certain
features are successfully performed or accessed (e.g., Call Hold, Automatic
Callback Busy).
Tone 3 Sent before a conversation is established when accessing the following features:
• Call Pickup
• Call Hold Retrieve with the Feature Number
• Conference
• Paging/Paging Answer
To Next Page
Loading...
