1.1 General Features
Feature Manual 105
• Line Preference Override
A user can override the preset line preference temporarily by pressing the desired Outside (CO) Line
Access button or INTERCOM button before going off-hook.
• System programming determines the extension users that can make outside (CO) line calls in each
time service mode ( [405-407] Flexible Outward Dialing—Day/Night/Lunch).
• It is possible to specify which outside (CO) lines are connected to the PBX ( [400] CO Line
Connection). This prevents extension users from trying to select or making calls using outside (CO)
lines that are not connected.
Programming Manual References
[PT Programming]
[400] CO Line Connection
[405-407] Flexible Outward Dialing—Day/Night/Lunch
[419] Automatic Designated Line Access
[PC Programming]
9.2.3 PT personal settings [2-3]—Line Preference—Outgoing
9.3.2 Incoming / Outgoing [3-2]—Outgoing Call—Day, Night, Lunch
9.3.3 Detail [3-3]—Connection, Automatic Line Access
Feature Manual References
1.1.61 Flexible Buttons
Operating Manual References
1.2.1 Making Calls
3.1.2 Personal Feature Assignment—Line Preference—Outgoing
3.1.3 Flexible Button Assignment—S-CO, G-CO, or O-CO button
1.1.77 Live Call Screening (LCS) (Voice Mail APT Integration only)
Description
Similar to a conventional home answering machine, a proprietary telephone (PT) user can monitor his or
her own mailbox as a caller is leaving a message and, if desired, answer the call simply by pressing the Live
Call Screening (LCS) button.
PT users can choose one of 2 ways to perform LCS, through personal programming (Live Call Screening
[LCS] Mode Set):
Hands-free mode: The user can screen calls automatically through the built-in speaker.
Private mode: The user will hear an alert tone when a message is being recorded in his or her mailbox. To
screen calls, the user must press the MONITOR, SP-PHONE, or LCS button.
This feature is available when the PBX is connected to a Panasonic Voice Processing System (VPS) that
supports APT integration.
To Next Page
Loading...
