Panasonic KX-TDA100D - Page 41

Leaving a Message Waiting Indication/Calling Back the Caller Who Left
an Indication (Message Waiting)
For an extension leaving a message waiting indication
When the called extension is busy or does not answer your call, you
can leave a notification so that the called party may call you back.
For an extension receiving a message waiting indication
As a message receiver, the Message button light or Message/Ringer
Lamp lets you know that a call has been received. If you receive
notification, you can call the caller back by a simple operation.
For an extension leaving a message waiting indication
To leave a message waiting indication
PT/SLT/PS
Press MESSAGE
or enter 4.
On-hook.
When the called extension is busy or does not answer
OR
4
MESSAGE
C.Tone
To leave/cancel a message waiting indication
PT and SLT
PT/SLT/PS
Off-hook.
Enter 1 to leave
or 0 to cancel.
On-hook.
Enter desired
extension number.
Leave
Cancel
1
0
OR
07
Enter 70.
desired
extension no.
C.Tone
For an extension receiving a message waiting indication
To check the left message and call back
While on-hook
PT/PS
Press MESSAGE
until the desired
extension appears.
Off-hook. Talk.
MESSAGE
User Manual 41
1.2.4 When the Dialled Line is Busy or There is No Answer