Panasonic KX-TDA100D

1.2.6 Alternating the Calling Method (Alternate Calling—Ring/
Voice)
The caller can alternate the alerting method, either ring or
voice, when making an intercom call.
On the other hand, any extension can set the alerting
method,
either ring or voice, when receiving an intercom call.
Ringing (Default): You can call the other party with a ring
tone.
Voice-calling: You can talk to the other party immediately
after confirmation tone.
Ring
Ring
Hello
OR
To change the method
After dialling
Enter .
PT/SLT/PS
Talk.
C.Tone
• If the called party uses a single line telephone or portable station, Voice
-calling is not
available.
• This feature is not available when the called party’s telephone is in the Voice Call Deny mode.
Customising Your Phone
• 3.1.2 Settings on the Programming Mode—Alternate Receiving—Ring/Voice
Select the alerting method, either ring or the other party’s voice.
User Manual 47
1.2.6 Alternating the Calling Method (Alternate Calling—Ring/Voice)