Panasonic KX-TDA200 - Page 32

Operation
32 User Manual
Leaving a message waiting indication/Calling back the caller which left an
indication (Message Waiting)
— For a caller
To leave a message waiting indication
To leave/cancel a message waiting indication
— For a called extension
To check the left message and call back
— For a caller
When the called extension is busy or does not answer
your call, you can leave a notification so that the called
party may call you back.
— For a called extension
As a message receiver, the MESSAGE button light lets
you notice that a call has been received. If you receive
notification, you can call back the caller by a simple
operation.
No Picture Available
PT/SLT/PS
Press MESSAGE
or enter 4.
On-hook.
When the called extension is busy or does not answer
C.Tone
OR
MESSAGE
4
PT and SLT
PT/SLT/PS
Off-hook.
Enter 1 to leave
or 0 to cancel.
On-hook.
Enter desired
extension number.
Leave
Cancel
1
0
OR
C.Tone
0
7
Enter 70.
desired
extension no.
While in on-hook
PT/PS
Press MESSAGE
until the desired
extension appears.
MESSAGE
Off-hook. Talk.