Panasonic KX-TDA200 - Page 33

Operation
User Manual 33
To call back
Joining an existing call (Executive Busy Override)
You can call the party who is talking with another on the telephone and then establish a three-party
conversation.
To join
• The MESSAGE button light shows the current status as follows:
Off
: No message
Red on
: You have a message.
• The display shows the messages starting with the most recent call.
• You can also have a Message button of another extension or your receiving group, so that
you can handle the message as a substitute.
• This feature is also available for single line telephone extension users with a message
waiting light. Even if they don't have a message waiting light, they may hear a special ring
tone as notification while in on-hook, if required.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or re-arrange a Message button.
Off-hook.
OR
Press MESSAGE or enter 70 and then 2.
0
2
7
PT/SLT/PS
MESSAGE
Talk.
Off-hook.
Press
corresponding CO.
Enter 2.
Outside call
PT/PS
Busy Tone
Talk.
C.Tone
(CO)
2