Panasonic KX-TDA30

7.
a. In the IP Address box, type the IP address of the
card
*1
.
b. In the Subnet Mask
box, type the subnet mask address
of the network
*2
.
c. Click Apply.
8. If the IP address of the default gateway needs to be entered:
a. Click Common Settings. A dialogue box will appear.
b. In
the Gateway
Address
box, type the IP address of the
default gateway
*3
.
c. Click OK.
Note
To activate any
changes made in step 8, it is necessary
to set all installed IP-EXT cards to out-of-service status
(OUS), then back to in-service status (INS).
9. Move the mouse pointer over the IP-EXT card, then click
INS to set the card to in-service status.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
Information about IP Proprietary Telephones 35
4.1.1 Assigning the IP Addressing Information