6.
a. Select KX-TDA15/30 from PBX Model.
b. Select the USB or RS-232C tab, depending on the
serial interface connection with the PBX.
c. Enter the system password for installer (default:
1234).
d. Click Connect.
7. When country/area data do not match:
a. Click OK
to replace the country/area data
of the PBX.
Replacement may take several minutes to complete.
b. Follow the procedure described in "Section 3 Starting
the PBX" and restart the PBX.
c. Repeat step 5 to reconnect the Maintenance Console
to the PBX.
8. Follow the instructions of the Quick Setup wizard and as-
sign the basic items (Quick Setup).
The system menu appears. You may now begin program-
ming the PBX.
26 Getting Started
4.3 Programming the PBX
To Next Page
Loading...
