To Next PageTo Next Page
Why some Panasonic KX-TDA30 PBX features not working?
If some features on your Panasonic PBX system aren't working, it could be due to system management restrictions. Consult your manager about this. It's also possible that the feature numbers have changed. Confirm the revised number and try again.
How to fix Panasonic KX-TDA30 PBX telephone that does not work properly?
If your Panasonic PBX telephone isn't working properly, first confirm with your manager that your settings are correct. If the problem persists, consult your dealer.
What to do if I forgot my Panasonic PBX password?
If you forgot your Panasonic PBX password, ask the manager to assist you.
What to do if I forgot the password for Panasonic Telephone?
If you forgot the password, ask the manager to assist you.
Why can't I make outside calls or transfer calls on my Panasonic KX-TDA30 PBX?
If you cannot originate an outside call, transfer a call, or conduct a conference on your Panasonic PBX, the corresponding CO button likely does not exist on the PT (Proprietary Telephone). Program the CO button.
How to eliminate noise on external paging on Panasonic?
To resolve noise on external paging with the Panasonic system, use a shielded cable as the connection wire between the Hybrid IP-PBX and the amplifier. A short shielded cable is recommended.
Why aren't parallel single line phones ringing on my Panasonic KX-TDA30 PBX?
If the paralleled single line telephones do not ring on your Panasonic PBX, "No ring" may be selected. Change the setting to ring.
Why isn't my Panasonic KX-TDA30 PBX telephone working with personal settings?
If your Panasonic PBX telephone does not work using the personal settings or with other settings (One-touch dialing, forwarding destination, etc.), the extension line has been changed. Clear the settings and then programme your desired settings again.
What to do if I cannot remember Panasonic KX-TDA30 PBX feature numbers?
If you cannot remember the feature numbers for your Panasonic PBX, if the feature numbers have been changed from the default values, write the new feature numbers in the table in "4.2.1 Feature Number Table". You can also ask your dealer to change the feature numbers for easier use.
Why does my Panasonic PBX line disconnect during outside calls?
If your Panasonic PBX line disconnects while talking to an outside party, the time limit has run out. Consult your dealer to extend the time limit, if necessary.
General| Number of users | 52 user(s) |
|---|---|
| DECT connectable | Yes |
| Number of DECT cell stations | 4 |
| RS-232 ports | 1 |
| RJ-11 ports quantity | 2 |
| AC input voltage | 110-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 55 W |
Weight and Dimensions| Weight | 3500 g |
|---|---|
| Dimensions (WxDxH) | 275 x 117 x 376 mm |
Covers various methods for making calls using the PBX system.
Covers various operations that can be performed while on a call.
Explains how to forward incoming calls to a specified destination.
Explains the answering machine service provided by the PBX when an SVM card is installed.
Explains controlling status (Log-in, Log-out, Wrap-up) within an incoming call distribution group.
Allows supervisors to monitor and control call status and extension logs for ICD groups.
Explains how hotel operators use telephones to manage guest room status and set wake-up calls.
Offers solutions for common problems encountered with the telephone system.
