1.4 Display Features
1.4.1 Call Log, Incoming
When you receive an outside call, an external sensor call or extension call
*1
, call information is recorded
automatically in the incoming call log. A preprogrammed number of calls can be logged per extension. When
the call log is full and another call arrives, the oldest call is deleted.
When the Call Log button light turns on, there is a call which you did not answer.
The following information is logged.
KX-T7636/KX-T7633/
KX-T7630/KX-T7433
KX-NT500 series/KX-NT400/
KX-NT300 series (except KX-NT321)/
KX-DT300 series (except KX-DT321)/
KX-NT136
Telephone
Caller's Name
Information
Caller's Phone
Number
Date/Time call
received
Answered or
Not Answered
Confirmed or
Not Confirmed
KX-TD7695/KX-TD7685/
KX-TD7694/KX-TD7684/
KX-TD7690/KX-TD7680/
KX-TD7696/KX-TCA185/
KX-TCA285/KX-TCA385
6-line display PT
3-line display PT except
KX-T7633/KX-T7630/
KX-T7433
1-line or 2-line display PT
KX-NT321/KX-NT265/
KX-DT321
Wireless phone
(KX-TD7895/KX-T7885)
*
1
*
1
KX-WT125/KX-WT126
*1
Incoming
calls from extensions can be recorded to the incoming call log, depending on system programming. For more information,
consult your System Administrator or System Manager.
*2
If the caller’s name is not logged, the caller’s phone number is displayed.
If the caller’s name is logged, the caller’s phone number is not displayed.
• The
following PSs can display incoming call log information from other extensions (including
TIE) with same information as a PT connected to the PBX.
– KX-TCA185/KX-TCA285/KX-TCA385
• PSs other than these may not display the same incoming call log information as a PT
connected to the PBX.
• For details about referencing the incoming call log using the PS's navigator key, refer to the
PS's documentation.
152 Operating Manual Document Version 2013-05
1.4.1 Call Log, Incoming
To Next Page
Loading...
Need help?
General
Weight and Dimensions
