Panasonic KX-TDE200 Operating Manual

• For information about other supervisory features, refer to
"1.3.42 ICD Group
Features—Supervisory".
1.3.39 ICD Group Features—Log-in/Log-out
You can control your status in an incoming call distribution
(ICD) group. When in the Log-out mode, incoming calls to
the group will not ring at your extension. When you return,
calls will again ring at your extension. (Default: Log-in)
Even if your extension is logged-in, you can have a
specified time period (wrap-up time) when you will not
receive calls after completing a previous call. This time can
be used for you to write a report and so on.
You can also manually select "Not Ready" mode to
temporarily leave an ICD group.
Log-in
Log-out
Wrap-up
Talk.
Not Ready
Ready
To set Log-in/Log-out
Off-hook.
On-hook.
PT/SLT/PS/SIP Extn.
Enter 736.
Log-out
Log-in
0
1
OR
Enter ICD Group
extension number or .
Specified
OR
ICD Group
extension no.
All
3 67
Enter 0 or 1.
C.Tone
ICD Group: Incoming Call Distribution Group
98 Operating Manual Document Version 2013-05
1.3.39 ICD Group Features—Log-in/Log-out

Panasonic KX-TDE200 Specifications

General

LED indicators	Yes
SIP extensions	128
Number of extensions	256
Number of DECT cell stations	32

Weight and Dimensions

Weight	15966.5 g
Dimensions (WxDxH)	424 x 276 x 439 mm