EasyManuals Logo

Panasonic KX-TDE200 Operating Manual

Panasonic KX-TDE200
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
• The CO or INTERCOM button light shows the current status as follows:
– Regular Hold mode
Flashing green slowly: Your held call
Flashing red: Another extension’s held call
– Exclusive Call Hold mode
Flashing green moderately: Your held call
Red on: Another extension’s held call
• If
a call is not retrieved within a specified time, you will hear an alarm as a reminder (Hold
Recall).
If an outside call is not answered within a specified time, it is automatically disconnected.
• Hold Mode Change (PT only)
After pressing the HOLD button, if you press the HOLD button again, the status switches
from the Regular Hold mode to the Exclusive Call Hold mode or from the Exclusive Call Hold
mode to the Regular Hold mode.
• If Automatic Call Hold has been preprogrammed, you can put the current call on hold
automatically
by pressing another CO, ICD Group or INTERCOM button to make or answer
another call.
• For the Call Hold Retrieve operation using a PDN/SDN button, refer to "1.3.50 PDN (Primary
Directory Number)/SDN (Secondary Directory Number) Extension".
1.3.7 Call Monitor
A preprogrammed extension user can listen to the ongoing conversation of a busy extension user.
After
pressing a DSS button, you can check the caller information of the call to another extension on the display.
Then, you can choose to monitor the call, if necessary.
To monitor
PT/SLT/PS
Enter 5.
5
Off-hook.
C.Tone
Monitoring starts
B. Tone
Press red DSS, PDN, or SDN, or dial extension number.
extension no.
(SDN)
OR
OR
(PDN)
OR
(DSS)
A busy tone is heard and the caller
information of the call to another
extension is displayed.
1.3.8 Call Park
You
can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the parked
call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a Call Park
button and Call Park (Automatic Park Zone) button have been established, you can select either way to park
by simply pressing the corresponding button.
Document Version 2013-05 Operating Manual 37
1.3.8 Call Park

Table of Contents

Other manuals for Panasonic KX-TDE200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic KX-TDE200 and is the answer not in the manual?

Panasonic KX-TDE200 Specifications

General IconGeneral
LED indicatorsYes
SIP extensions128
Number of extensions256
Number of DECT cell stations32
Weight and Dimensions IconWeight and Dimensions
Weight15966.5 g
Dimensions (WxDxH)424 x 276 x 439 mm

Related product manuals