Panasonic KX-TDE600

10.8 [8-7] Authorisation Code for TRG
An Authorisation code can be specified for each trunk group. The Authorisation codes entered here can be
added to user-dialled numbers by adding "G" to the Modify Command specified on the Carrier tab of
screen 10.6 [8-5] Carrier.
8 trunk groups are displayed on the screen at a time. To display other groups, click the applicable tab.
Authorisation Code for Trunk Group—TRG 01–TRG 64 (KX-TDE100/
KX-TDE200), or TRG 01–TRG 96 (KX-TDE600)
Specifies the Authorisation code of each carrier for each trunk group.
Value Range
Max. 10 digits (consisting of 0–
9, *, and #)
Maintenance Console Location
10.8 [8-7] Authorisation Code for TRG
Programming Manual References
10.6 [8-5] Carrier—Carrier
—
Modify Command
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
858 PC Programming Manual
10.8 [8-7] Authorisation Code for TRG