32
KX-TG1032S/KX-TG1033S/KX-TG1034S/KX-TGA101S
8.3. How to Clear User Setting
Units are reset to the Factory settings by this operation (Erase recorded Voice messages, stored Phone numbers, Caller list and
etc.)
Note:
• The reset menus differ depending on the following operations.
• This operation should not be performed for a usual repair.
8.3.1. Resetting both base unit and handset
Note:
(*1) Refer to Registering a Handset (P.20).
• Handset registration will not be reset.
8.3.2. Resetting only handset
The only handset is reset by doing the following steps to .
Note: (*2)
• The registration of the base unit and the handset are cancelled.
• If the handset needs to be registered to the base unit, refer to Registering a Handset (P.20).
• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.
• Caller ID data will not be reset.
8.3.3. Delete all handset registration of base unit
To Next Page
Loading...
