Panasonic KX-TG4031C

Programming
20
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 20)
– using the direct commands (page 22)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2 Press {V} or {^} to select the desired main menu. i {SELECT}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4 Press {V} or {^} to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 22 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller list
\
––30
Answering device
e
Play new msg. –34
Play all msg. –34
Erase all msg.
*1
–35
Greeting Record greeting
*1
33
Check greeting 33
Pre-recorded
*1
33
Settings Ring count
*1
36
Recording time
*1
37
Remote code
*1
35
Screen call 32
Answer on
*1
–32
Answer off
*1
–32
V.M. access
g
––39
Intercom
4
––40
TG403xC(e).book Page 20 Wednesday, January 13, 2010 1:44 PM