Getting Started
9
Setting up
Connections
L Use only the supplied Panasonic AC
adaptor PQLV219.
■ Base unit
*DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
■ Charger
Battery installation
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Confirm correct polarities (S, T).
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged,
the charge indicator goes off and
“Fully charged” is displayed.
DSL/ADSL filter*
Hooks
“Click”
Press plug firmly.
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
“Click”
Correct Wrong
(120 V AC, 60 Hz)
Hooks
L When the language selection is
displayed, see page 12.
Rechargeable Ni-MH ONLY
Confirm “Charging” is displayed.
Charge indicator
TG403xC(e).book Page 9 Wednesday, January 13, 2010 1:44 PM
To Next Page
Loading...
