Panasonic KX-TG5433

Intercom Features
32 For assistance, please call 1-800-211-PANA (7262).
For KX-TG5433 users
Call the desired unit by selecting the
extension number, shown in the upper
right of each handset’s display. The base
unit’s extension number is 0.
L To confirm the handset’s extension
number ([1], [2], or [3]), place the
handset on the base unit or charger.
L The base unit will display the paging or
paged handset number (H1, H2, or
H3).
From the handset to the base unit
1 Handset:
Press {INTERCOM}, then press {0}.
L You can also select the base unit by
pressing {V} or {^} then pressing
{>}.
L The base unit will ring for 1 minute.
L To stop paging, press {OFF}.
2 Base unit:
Press {CALL} to answer the page.
3 Handset:
When finished talking, press {OFF} or
place the handset on the charger.
Note:
L During an intercom call, the handset
user can switch to the speaker by
pressing {s}. To switch back to the
receiver, press {C}.
L To adjust the base unit’s speaker
volume, press {>} or {<} repeatedly. 8
levels (high to low) are available.
From the base unit to a handset
1 Base unit:
Press {SELECT} repeatedly until the
desired handset’s extension number is
displayed on the base unit, then press
{CALL}.
L The handset will beep for 1 minute.
L To stop paging, press {CALL}.
2 Handset:
Press {C}, {s}, or {INTERCOM} to
answer the page.
3 Base unit:
When the paged party answers, speak
into the MIC.
4 Base unit:
When finished talking, press {CALL}.
Note:
L You can locate a misplaced handset by
paging it. (Handset locator)
From one handset to another handset
Example: When handset 1 calls handset 3.
1 Handset 1:
Press {INTERCOM}, then press the
other handset number {3}.
L You can also select the handset by
pressing {V} or {^} then pressing
{>}.
L The paged handset will beep for 1
minute.
L To stop paging, press {OFF}.
2 Handset 3:
Press {C}, {s}, or {INTERCOM} to
answer.
3 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
TG5431_5432_5433(e).book Page 32 Friday, January 14, 2005 4:11 PM