EasyManua.ls Logo

Panasonic KX-TG5433

Panasonic KX-TG5433
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Programmable Settings
40 For assistance, please call 1-800-211-PANA (7262).
Display options
Handset LCD contrast
You can adjust the handset display
contrast. There are 6 levels. The default
setting is level 3.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “LCD contrast” by pressing
{V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
the desired setting.
5 Press {Save}, then press {OFF}.
Display language
You can select either “English” (default)
or “Español” as the display language.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Change language” by
pressing {V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
the desired language.
L You can also select by pressing
{English} or {Español}.
5 Press {Save} or {Salvar}, then press
{OFF}.
Note:
L If you select a language you cannot
read, press {MENU} {0} {8} {1} {Save}
to change the display language to
English.
Telephone settings
Dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service.
Tone” (default): For tone dial service.
Pulse”: For rotary pulse dial service.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Set tel line” by pressing
{V} or {^}, then press {>}.
4 Scroll to “Set dial mode” by pressing
{V} or {^}, then press {>}.
5 Press {V} or {^} repeatedly to select
the desired setting.
6 Press {Save}, then press {OFF}.
Flash time
The flash time depends on your telephone
exchange or host PBX.
You can select: “90ms” (milliseconds),
100ms”, “110ms”, “250ms”, “300ms”,
400ms”, “600ms”, or “700ms” (default).
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Set tel line” by pressing
{V} or {^}, then press {>}.
4 Scroll to “Set flash time” by
pressing {V} or {^}, then press {>}.
5 Press {V} or {^} repeatedly to select
the desired setting.
6 Press {Save}, then press {OFF}.
TG5431_5432_5433(e).book Page 40 Friday, January 14, 2005 4:11 PM

Table of Contents

Other manuals for Panasonic KX-TG5433

Related product manuals