Panasonic KX-TG6591C

available for Call Display subscribers
(page 32).
Changing group names
The default group name is “Group 1”
to “Group 9”.
1 M N a MMENUN
2 MbN: “Group” a MSELECTN
3 MbN: Select the desired group. a
MSELECTN
4 MbN: “Group name” a MSELECTN
5 Edit the name (10 characters max.;
page 18). a MSAVEN
6 MOFFN
Finding and calling from a
phonebook entry
Scrolling through all entries
1 M N
2 MbN: Select the desired entry.
3 M
N
Searching by first character
1 M N
2 Press the dial key (0 – 9 or #)
which contains the character you
are searching for (page 18).
R Press the same dial key
repeatedly to display the first
entry corresponding to each
character located on that dial key.
R If there is no entry corresponding
to the character you selected, the
next entry is displayed.
3 MbN: Scroll through the phonebook if
necessary.
4 M N
Searching by group
1 M N a MGROUPN
2 MbN: Select the group you want to
search. a MSELECTN
R If you select “All groups”, the
unit ends the group search.
3 MbN: Select the desired entry.
4 M N
Editing entries
1 Find the desired entry (page 19). a
MEDITN
2 Edit the name if necessary (16
characters max.; page 18). a MOKN
3 Edit the phone number if necessary
(24 digits max.). a MOKN
4 MbN: Select the desired group
(page 18). a MSELECTN 2 times
5 MOFFN
Erasing entries
Erasing an entry
1 Find the desired entry (page 19).
2 MERASEN a MbN: “Yes”
3 MSELECTN a MOFFN
Erasing all entries
1 M
N a MMENUN
2 MbN: “Erase all” a MSELECTN
3 MbN: “Yes” a MSELECTN
4 MbN: “Yes” a MSELECTN
5 MOFFN
Chain dial
This feature allows you to dial phone
numbers in the phonebook while you are
on a call. This feature can be used, for
example, to dial a calling card access
number or bank account PIN that you
have stored in the phonebook, without
having to dial manually.
19
Shared Phonebook