Panasonic KX-TG6591C

Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R If you receive an outside call while
talking on the intercom, you hear 2
tones.
– To answer the call with the
handset, press MOFFN, then press
M N.
– To answer the call with the base
unit, press MSP-PHONEN 2 times.
R When paging unit(s), the paged
unit(s) beeps for 1 minute.
Making an intercom call
Handset
1 MMENUN a MINTN
2 MbN: Select the desired unit. a
MSELECTN
R To stop paging, press MOFFN.
3 When you finish talking, press
MOFFN.
Base unit
1 Press MINTERCOMN.
R All registered handsets beep for 1
minute.
R To stop paging, press
MINTERCOMN.
2 When you finish talking, press
MINTERCOMN.
Answering an intercom call
Handset
1 Press M N to answer the page.
2 When you finish talking, press
MOFFN.
Base unit
1 Press MINTERCOMN to answer the
page.
2 When you finish talking, press
MINTERCOMN.
Handset locator
You can locate a misplaced handset by
paging it.
1 Base unit: Press MLOCATORN.
R All registered handsets beep for 1
minute.
2 To stop paging:
Base unit:
Press MLOCATORN.
Handset:
Press M
N, then press MOFFN.
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can
be made:
– between 2 handsets
– between a handset and the base unit
Handset
1 During an outside call, press MINTN
to put the call on hold.
2 MbN: Select the desired unit. a
MSELECTN
3 Wait for the paged party to answer.
R If the paged party does not
answer, press M
N to return to
the outside call.
4 To complete the transfer:
Press MOFFN.
R The outside call is being routed to
the destination unit.
43
Intercom/Locator