Sub-menu 1 Sub-menu 2 Settings Code
Set tel line
Set dial mode
*1
1: Pulse
2: <Tone>
#120 13
Set flash time
*1, *10
0: 900 ms
1: <700 ms>
2: 600 ms
3: 400 ms
4: 300 ms
5: 250 ms
G: 200 ms
#: 160 ms
6: 110 ms
7: 100 ms
8: 90 ms
9: 80 ms
#121 16
Set line mode
*1, *11
1: A 2: <B> #122 –
C. WTG options
*1
(Call Waiting Deluxe
options)
1: On 0: <Off> #215 32
Privacy mode
*1
– 1: On 0: <Off> #194 17
Registration Register handset
– #130 30
Deregistration
*2
– #131 30
Change language Display
1: <English>
2: Français
#110 13
Voice prompt
*1
1: <English>
2: Français
#112 13
Main menu: “Customer support”
*12
Operation Code
Displaying customer support Web address. #680 –
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only
available in direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off,
select “Manual”. (Call Display subscribers only)
To use this feature, set the date and time first (page 13).
*4 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
26
Programming
To Next Page
Loading...
