Panasonic KX-TG7621 series

– 9 –
Using a Bluetooth wireless headset (optional) for landline calls
By registering a Bluetooth headset to the base unit, you can have a hands-free
conversation wirelessly for landline calls.
LWhile someone is using a cellular line, the Bluetooth headset connection is not
available.
Registering a headset to the base unit
1 Your headset:
Set your headset to registration mode.
LRefer to your headset operating instructions.
2 Handset:
{MENU} (621
3 Enter your headset PIN.
LTypically, default PIN is “0000”. Refer to the headset operating instructions.
4 Press {OK}, then wait until a long beep sounds. s {OFF}
LWhen the HEADSET indicator on the base unit lights green, you are ready to use
the headset.
Operating a Bluetooth wireless headset using a landline
Refer to your headset operating instructions for headset operations.
NAnswering landline calls with your headset
To answer a landline call, turn on your headset referring to your headset operating
instructions.
When you finish talking, turn off your headset referring to your headset operating
instructions.
LIf you cannot hang up the call using your headset;
− press {} (STOP) on the base unit. (KX-TG7621 series)
− press {SP-PHONE} on the base unit 2 times. (KX-TG7641 series)
NSwitching between the base unit and your headset
You can switch between the base unit and your headset:
− during a landline call with the base unit speakerphone. (KX-TG7641 series)
− during an intercom call between the base unit and handset. (KX-TG7641 series)
− while listening to messages recorded on the base unit answering system.
*1
KX-TG7641 series
To switch to your headset:
Press {HEADSET} on the base unit.
To switch to the base unit:
Press {SP-PHONE} on the base unit.
*1 KX-TG7621 series
LYou can only switch from the base unit to your headset. Turn on the headset
referring to your headset operating instructions.
Using Bluetooth devices
Register
Register using the handset.
TG76xx_(e)_QG.fm Page 9 Tuesday, December 14, 2010 8:38 PM