27
KX-TGH260/KX-TGH262/KX-TGH263/KX-TGH264/KX-TGHA20/KX-TGA20
Frequently Used Items (Base Unit)
ex.)
Note:
(*1) When you enter the address or New Data, please refer to the table below.
Items Address Default Data New Data Remarks
C-ID(FSK) sensitivity 06 0E 00 01 (6dB up) 02 (12dB up) When the hex change from 00 to 01 or 02, gain
increase by 6 dB or 12 dB.
Frequency 00 07 / 00 08 70/02 - - Use these items in a READ-ONLY mode to
confirm the contents. Careless rewriting may
cause serious damage to the computer system.
ID 00 02~00 06 Given value - -
Desired Number (hex) Input Keys Desired Number (hex) Input Keys
0 0 A [Flash] + 0
1 1 B [Flash] + 1
. . C [Flash] + 2
. . D [Flash] + 3
. . E [Flash] + 4
9 9 F [Flash] + 5
7). Press
{
OK
}
, a long confirmation beep
will be heard.
8).
Press to return to standby mode.
After that, turn the base unit power off and then power on.
Note:(*)“Set tel line" isn't displayed in Cell line only mode.
To return to normal mode, execute the following procedure:
New Data
_ _ _ _ _ _
Set Addr.:
Set Addr.:
{OFF}
CLEAR
OK
BACK
1 {MENU} i {#}{1}{5}{7}
2 {V}/{^}: Select "off "i {SELECT}
3 {OFF}
To Next Page
Loading...
