Panasonic KX-TGH262B - Handset LCD Replacement Procedure; LCD Preparation and Positioning Steps; Connecting LCD to Main PCB Instructions

51
KX-TGH260/KX-TGH262/KX-TGH263/KX-TGH264/KX-TGHA20/KX-TGA20
11.2. How to Replace the Handset LCD
Note:
The illustrations are simplified in this page.
They may differ from the actual product.
Bend FFC and x to the positioning points (2 points)
RI B
LCD
LCD connector
2 points
LCD
Main P.C.B
Insert LCD connector to MAIN P.C.B.
FRONT SIDE OF LCD
BACK SIDE OF LCD
DOUBLE SIDE TAPE
Peel o DOUBLE SIDE TAPE at the back side LCD 2 points as a gure shown.
LCD r i b
B
A
Fit the positioning point(2 points)
when attaching LCD UNIT.