To Next PageTo Next Page
What to do if I cannot make a call on my Panasonic Cordless Telephone?
If you cannot make a call on your Panasonic Cordless Telephone, check if the STATUS indicator is lit green. Ensure the base unit isn't downloading a software update (wait until the STATUS indicator stops flashing and turns steady green). Also, make sure the handset is close enough to the base unit. If the problem persists, contact your administrator.
General| Wireless Technology | DECT |
|---|---|
| Frequency | 1.9 GHz |
| Base Station Handsets Supported | 6 |
| Simultaneous Calls | 3 |
| Protocols Supported | SIP |
| Caller ID | Yes |
| Call Waiting | Yes |
| Conference Calling | Yes |
| Voicemail | Yes |
| Handset Speakerphone | Yes |
| Power | AC Adapter |
| Network | Ethernet |
| PoE | Yes |
| Headset Jack | 2.5mm |
| Codecs | G.711, G.729 |
| Display | LCD |
| Range | Up to 300 meters outdoors, 50 meters indoors |
Details models, components, and feature differences between KX-TGP500 and KX-TGP550.
Instructions for emergency calls, accessories, and expanding the phone system with additional handsets.
Guidance on disposing of electrical equipment and batteries responsibly according to regulations.
Explains handset/base unit controls, indicators, display items, and menu icons.
Guide to initial setup procedures and checking VoIP server line status.
Step-by-step instructions for making, answering, and redialing calls using the handset.
Covers Hold, Mute, Call Waiting, and making second calls during an active call.
Procedures for transferring and conferencing calls to other parties.
Instructions for making, answering, and redialing calls using the base unit.
Covers Hold, Call Waiting, Transferring, and Conferencing calls on the base unit.
Adding, finding, calling, and editing contacts in the handset phonebook.
Erasing entries, using speed dial, and copying/exporting phonebook data.
Adding, finding, calling, and editing contacts for the base unit.
Erasing, speed dial, and copying/exporting phonebook data for the base unit.
Overview of methods to program handset features via menus or direct commands.
Configuring Call Forward, Do Not Disturb, Block Anonymous, and Incoming Call Barring.
Changing base PIN, handset name, date/time, and updating software.
Overview of methods to program base unit features via menus or direct commands.
Configuring Call Forward, Do Not Disturb, Block Anonymous, and Incoming Call Barring for the base unit.
Changing base PIN, date/time, and updating software for the base unit.
Steps to activate and use the web interface for configuration.
Procedures for registering, deregistering, and operating additional units.
Using Caller ID service, viewing the caller list, and managing entries.
Information on voice mail service and setting message alerts.
Making, answering, and transferring intercom calls between handsets.
Intercom between handset/base unit, auto intercom, and room monitoring.
Paging a misplaced handset to locate it.
Explains how to enter text and characters using dial keys and entry modes.
Guidance on wall mounting the charger and base unit.
Lists common errors, troubleshooting steps, and solutions for various problems.
