Panasonic KX-TS620W

Phonebook
34
For assistance, please visit http://www.panasonic.com/phonehelp
Index table
Chain Dial
You can dial a combination of Phonebook or manual key pad entries while making
a call. This feature can be used, for example, to first automatically dial a calling
card access number that you have stored in the Phonebook, then manually or
automatically dial your PIN and then automatically dial the destination number
from the Phonebook.
Example: Using a long distance calling card.
• To prevent misdialing, we recommend you add pauses where needed when storing
numbers. For example, add pauses after a calling card access number and your PIN when
storing in the Phonebook (p. 38).
1. Search and dial from Phonebook: 1800123456 (Calling card access number)
• The Voice guidance may be announced.
2. Search and dial from Phonebook: 1234 (Calling card PIN)
3. Search and dial from Phonebook: 15550123456 (Destination number)
1
While you are on a call;
Press {:} or {9}.
2
Search for the desired item by pressing {4} or {3}.
• To search for an item by initial, see page 33.
3
Press {OK} (Send key).
• The phone number is dialed.
• If required, repeat steps 1 to 3 for any remaining number.
• When storing a calling card access number and your PIN in the Phonebook as one
item, press {PAUSE} to add pauses after the number and PIN as necessary
(p. 38).
• If you have rotary or pulse service, you need to press {£} (TONE) before pressing
{:} or {9} in step 1 to change the dialing mode temporarily to tone.
Keys Index Keys Index
{1}
Symbols, 1
{7}
P, Q, R, S, 7
{2}
A, B, C, 2
{8}
T, U, V, 8
{3}
D, E, F, 3
{9}
W, X, Y, Z, 9
{4}
G, H, I, 4
{£}
¢
{5}
J, K, L, 5
{0}
0, Space
{6}
M, N, O, 6
{#} #
TS620bk01.book Page 34 Wednesday, May 24, 2006 2:31 PM