52
Wall Mounting
This unit can be mounted on a wall.
1
Press the tabs in the direction of
the arrows (1), then remove
the wall mounting adaptor (2).
2
Connect the AC adaptor.
Tuck the telephone line cord
inside the wall mounting
adaptor, and push it in the
direction of the arrow.
• “UP WALL” should be facing
upward.
3
Drive screws (not included) into the
wall using the wall template below.
Connect the telephone line cord.
Mount the unit, and slide it down.
To temporarily set the handset down during a conversation,
place it as shown in this picture.
Wall Template
To p owe r
Outlet
Screws
To Single-Line
Telephone Jack
8.3 cm (3
9
/
32
")
8.3 cm (3
9
/
32
")
Useful Information
TS620bk01.book Page 52 Wednesday, May 24, 2006 2:31 PM
To Next Page
Loading...
