Panasonic KX-TVA200 - System Security; Administrator

2.8 System Security
System security settings are divided into the following categories:
– Administrator
– Subscriber
2.8.1 Administrator
Password
Assigns the password required when connecting to the VPS using KX-TVA Maintenance Console.
Follow the steps below to change the password.
1. Click Click to change password....
2. Enter a new password in Enter new password:.
3. Enter the new password in Confirm new password:.
4. Click OK.
Default
1234
Value Range
Max. 16 digits.
Feature Manual References
2.4.9 System Security
Login Failures before Disconnection
Specifies the number of times an invalid password can be entered, when the System Manager or Message
Manager tries to log in to the VPS using a telephone, before the call is disconnected.
208 Programming Manual Document Version 3.0 2010/06
2.8.1 Administrator