Panasonic KX-TVA200 - Language 1-5 (KX-TVA200), 1-3 (KX-TVA50); Selection Menu Wait Time

Feature Manual References
2.2.34 Multilingual Service
2.2.45 System Prompts
2.5.4.3 Language 1–5 (KX-TVA200), 1–3 (KX-TVA50)
Assigns a selection number (1–9) to each language. Callers use the numbers to select the desired languages
for their message prompts. This setting is required when either one or both of the following parameters are set
to "Selective":
a. "Prompt Mode" (see 2.1.5 External Message Delivery)
b. "Incoming Call Service Prompt", "Prompt for Rotary Callers" (see 2.3.1.1 Call Service)
Language
Specifies a language.
Default
None
Value Range
Selection from all installed languages (KX-TVA50: 3 languages, KX-TVA200: 10 languages)
Feature Manual References
2.2.45 System Prompts
DTMF
Specifies a selection number.
Default
None
Value Range
1–9/None
Selection Menu Wait Time
Specifies the length of time that the VPS waits for the caller to select a language by pressing the appropriate
dial key. If this time period expires without the selection number being entered, the VPS uses the Primary
Language.
Default
6 s
Value Range
0 s–20 s
Feature Manual References
2.2.45 System Prompts
148 Programming Manual Document Version 3.0 2010/06
2.5.4 Parameters