2.1.10 Automatic Login
Allows subscribers to access their mailbox directly without entering the mailbox number. Subscribers can
automatically log in from their extensions, by calling from an outside telephone whose number is stored as a
Caller ID number, or by dialing a telephone number assigned to a specified DID number or trunk (CO line).
When logging in from outside telephones, the Toll Saver feature is also available.
Extension
If set to "Enable", subscribers are able to access their mailbox directly without entering the mailbox number.
Default
Enable
Value Range
Disable, Enable
Feature Manual References
2.3.2 Automatic Login (APT/DPT Integration Only)
Caller ID 1, Caller ID 2
Specifies the telephone number from which the subscriber can automatically be logged in from. When Caller
ID information is received that matches one of these numbers, the caller (subscriber) is automatically logged
in to the mailbox. Note that this telephone number must be unique for each mailbox.
Document Version 3.0 2010/06 Programming Manual 73
2.1.10 Automatic Login
To Next Page
Loading...
