Panasonic KX-TVA200 - Operator Service

Value Range
0 s–20 s
Feature Manual References
2.2.3 Automated Attendant
Menu Repeat Cycle
Specifies the number of times the VPS will play the Automated Attendant top menu if the caller does not make
a selection.
Default
3 times
Value Range
1–5 times
Play Owner’s Name during Transfer
Determines whether "Transferring you to (name)." is announced to the caller before transferring the caller to
an extension.
Default
Disable
Value Range
Disable, Enable
Feature Manual References
2.2.3 Automated Attendant
Operator Service
These parameters specify the extension numbers and mailbox numbers for operators 1, 2, and 3, as well as
calls are treated when they are directed to and operator. Operator parameters can be set individually for day,
night, lunch, and break modes.
Note
• All non-touch input calls in Automated Attendant Service will be transferred to the General Delivery
Mailbox when the Operator Service is disabled.
Operator Service For Day, Night, Lunch, and Break
Determines the settings for each operator in each time mode. Note that the extension assigned as Operator
1 for day mode is automatically designated as the Message Manager. When operator calls are made, calls are
connected to the lowest-numbered operator that is available. To enable/disable the operator setting for each
time mode, check/uncheck it.
108 Programming Manual Document Version 3.0 2010/06
2.4.3 Parameters