2.5 System Parameters
System Parameters are divided into the following screens:
– Mailbox Group
– Extension Group
– System Caller Name Announcement
– Parameters
Click each tab at the bottom of the System Parameters screen to edit the parameters.
Each parameter setting can be sorted in either ascending or descending by clicking the header. Sorting is not
available for the "Parameters" tab.
2.5.1 Mailbox Group
Also called System Group Distribution Lists.
Mailbox Groups allow a caller or subscriber to record a message and have it sent to several mailboxes.
Messages sent to a Mailbox Group are sent to all subscribers in the group. The VPS can maintain a maximum
of 20 Mailbox Groups. Each group can have a maximum of 62 members for KX-TVA50 or 100 members for
KX-TVA200. Only the System Administrator can create or edit Mailbox Groups. (Each subscriber can create
and edit his or her own Personal Group Distribution Lists.)
Follow the steps below to edit a Mailbox Group.
Document Version 3.0 2010/06 Programming Manual 133
2.5.1 Mailbox Group
To Next Page
Loading...
