Panasonic KX-TVA200 - Message Waiting Lamp Retry Time; Message Waiting Lamp Interval Time

Feature Manual References
2.2.33 Message Waiting Notification—Lamp
Message Waiting Lamp Retry Time
Specifies the number of times the VPS will retry turning on/off the Message Waiting Lamp of an extension.
This parameter is enabled only when the integration mode is None or Inband mode.
Default
2
Value Range
0–5 times
Feature Manual References
2.2.33 Message Waiting Notification—Lamp
Message Waiting Lamp Interval Time
Specifies the time between retries when the VPS retires turning on/off the Message Waiting Lamp of an
extension. This parameter is enabled only when the integration mode is None or Inband mode.
Default
1
Value Range
1 min–60 min
Feature Manual References
2.2.33 Message Waiting Notification—Lamp
Call Waiting Sequence
Specifies the sequence for performing Call Waiting if the called extension is busy.
Default
1
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialing
0–9, , #: Dial Code
156 Programming Manual Document Version 3.0 2010/06
2.5.4 Parameters