Panasonic KX-TVA200 - Setting Class of Service (COS) Parameters

Default
None
Value Range
Max. 20 digits
Feature Manual References
2.3.2 Automatic Login (APT/DPT Integration Only)
Subscriber’s Manual References
5.17 Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver
DID
Specifies the DID number for Automatic Login. When the VPS receives this DID number from the PBX, the
caller (subscriber) is automatically logged in to the mailbox. Note that this number must be unique for each
mailbox.
Note
• Automatic Login via DID number is only available when the VPS is connected to one of the following
PBXs using DPT Integration.
– KX-TD816 (P311Q or higher)
– KX-TD1232 (P211Q or higher)
– KX-TD500 (V4M or higher)
– KX-TDE series
– KX-TDA series
*1
(MPR Version 1.1 or higher)
*1
except KX-TDA50
Default
None
Value Range
Max. 20 digits
Feature Manual References
2.3.2 Automatic Login (APT/DPT Integration Only)
Subscriber’s Manual References
5.17 Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver
Trunk
Specifies the trunk (CO line) number for Automatic Login. When the VPS receives a call on this trunk (CO line),
the caller (subscriber) is automatically logged in to the mailbox. Note that this number must be unique for each
mailbox.
74 Programming Manual Document Version 3.0 2010/06
2.1.10 Automatic Login