Note
• This setting enables the PBX to send DID numbers to the VPS. If you want to use the features
which utilize DID numbers (e.g., Toll Saver, DID Call Routing), you must enable this setting.
8. Connect the jack assigned in Step 4 to the VPS.
9. Complete the PBX-VPS connection by following from step 1 of 4.7 Completing the PBX-VPS
Connection.
120 Installation Manual Document Version 3.0 2010/06
4.5 KX-TD500 PBX Programming for DPT Integration
To Next Page
Loading...
