Example Settings (1)
Program the PBX so that all trunk (CO line) calls are directed to the VPS (DIL feature).
1. Go to the CO & Incoming Call-DIL Table & Port Setting screen.
2. Assign the DIL Destination for each time mode and trunk (CO line) to a floating extension number (VPS
Port).
3. Click Apply to save the changed data.
Calls received on the assigned trunks (CO lines) will be directed to the VPS. The VPS will answer those calls
using the service (AA, VM, Custom Service, etc.) assigned to each VPS port through VPS programming.
Note
• The above screen output appears only when all the trunk (CO line) cards mounted on your PBX are
LCOT8 cards.
136 Installation Manual Document Version 3.0 2010/06
5.3 KX-TDE, KX-TDA, and KX-TAW Series PBX Programming for Inband Integration
To Next Page
Loading...
